Barcode printer setup for Invision
Barcode printers currently defined are:


VPS Definition:

DEST=Uxxxx,
AUTOEJCT=(N,N,N,N),
COMMTYPE=(TCPIP,LPD),
COMPRESS=N,
TCPOPTS=00000000,
PRTXLATE=(Y,ZPSSXASC) ,       EBCDIIC x'B0' ---> ASCII x'5E' (caret)
RELREQ=I,
RUSIZE=4096,
SEPAR=N,
SVFACTN=(N,N,N),
QBUFSIZE=23476,
TCPHOST=nnn.nnn.nnn.nnn,
TCPPRTR=PR1


Z4Mplus Configurations
Id when needed is 'admin'
Password when needed is '1234'

  '+' Increments, '-' Steps to next digit

DARKNESS = 20
PRINT SPEED = 2 IPS
TEAR OFF +000 - BARS 50%
PRINT MODE = TEAR OFF
MEDIA TYPE = NON-CONTINUOUS
SENSOR TYPE = WEB
SENSOR SELECT = TRANSMISSIVE
PRINT METHOD = DIRECT-THERMAL
.
PRINT WIDTH = 104 0/8 MM
    Prefer 76 mm.
    When setting thru browser, set to 608 (bits)
       TLP 2844-Z must say 76mm.

MAXIMUM LENGTH = 39.0 IN 988MM
LIST FONTS
LIST BARCODES
LIST IMAGES
LIST FORMATS
LIST SETUP
LIST NETWORK
LIST ALL
FORMAT CARD = A: B:
INIT FLASH MEM.
SENSOR PROFILE
MEDIA AND RIBBON - SELECT SHOWS 'CALIBRATE'
PARALLEL COMM = BIDIRECTIONAL
SERIAL COMM = RS232
BAUD = 9600
DATA BITS = 8
PARITY = NONE
HOST HANDSHAKE = XON/XOFF
PROTOCOL = NONE
NETWORK ID = 000
COMMUNICATIONS = NORMAL MODE
CONTROL PREFIX = <# > 7EH
FORMAT PREFIX < > 5EH
DELIMITER CHAR = <,> 2CH
ZPL MODE = ZPL II
MEDIA POWER UP = CALIBRATION - also for TLP 2844-Z
HEAD CLOSE = CALIBRATION - also for TLP 2844-Z
BACKFEED = DEFAULT
LABEL TOP = +000 - BARS 40%
LEFT POSITION = +0000
WEB S. 038 - BARS 40%
MEDIA S 085 - BARS 65%
RIBBON S 066 - BARS 60%
TAKE LABEL 100 - BARS 90%
MEDIA LED 061 - BARS 20%
RIBBON LED 253 - BARS 85%
LCD ADJUST +10 - BARS 45%
FORMAT CONVERT = NONE
IDLE DISPLAY = FW VERSION
RTC DATE = 04/26/05
RTC TIME = 10:37
IP PROTOCOL = PERMANENT - also for TLP 2844-Z
IP ADDRESS = nnn.nnn.nnn.nnn - also for TLP 2844-Z
SUBNET MASK = 255.255.255.000 - also for TLP 2844-Z
DEFAULT GATEWAY = nnn.nnn.nnn.nnn
- also for TLP 2844-Z
PASSWORD LEVEL = SELECTED ITEMS
LANGUAGE = ENGLISH

Configuration of TLP 2844-Z should be done via a Browser.
Configuration of Z4Mplus can be done thru the front panel or via a browser.


Sample datastream via VPS...do not try to drive the printer directly from your PC
^XA
^MTD
^FO30,20^ADN^FD This is printer: VPRTBCD1^FS
^FO50,65^ADN^FD IP: 10.60.2.75^FS
^FO50,95^ADN^FD Help Desk: 483-6789 ^FS
^FO30,140^ADN^FD Put this label on printer ^FS
^XZ

Produces label containing:
     This is printer: VPRTBCD1
     IP: 10.60.2.75
     Help Desk: 483-6789
     Put this label on printer