Swap from Card 1 Port 1 CHP(00) CUU 0B00 to Card 2 Port 1 CHP(02) CUU 0C00

Prod LPAR  
P VPS because it requires TCPIP
P TCPIP might as well, already broken
V NET,INACT,ID=SWOPENEW,I
V NET,INACT,ID=XCAOSA,I
kill OpenLink LUs
kill OpenLink SNA via Card 1 Port 2 (0B10)
V 0B00-0BFF,OFFLINE,I if not already offline
V PATH((0B00-0BFF),00),OFFLINE if not already offline
CF CHP(00),OFFLINE if not already offline
CF CHP(02),ONLINE PATH should come online automatically
V 0C00-0CFF,ONLINE Put 1st card's addresses Online
Verify SYS1.VTAMLST members XCAOSA should address 0B10
NCAOSA should address 0C10
Verify SYS1.TCPPARMS members PROF107P should address 0B00
NROF107P should address 0C00
Rename SYS1.VTAMLST(XCAOSA) to OCAOSA to save it
Rename SYS1.VTAMLST(NCAOSA) to XCAOSA use 0C10 instead of 0B10
Rename SYS1.TCPPARMS(PROF107P) to OROF107P to save it
Rename SYS1.TCPPARMS(NROF107P) to PROF107P use 0C00 instead of 0B00
S TCPIP Restart TCPIP
S VPS Restart VPS
V NET,ACT,ID=XCAOSA,SCOPE=ALL
V NET,ACT,ID=SWOPENEW,SCOPE=ALL
restart OpenLink SNA via Card 2 Port 1 (0C10)
restart OpenLink LUs
Logon TSO, A.V
Rumba a PC to mainframe
Checkout printers
Test TCPIP connectivity
Rename SYS1.TCPPARMS(OROF107P) to NROF107P
Rename SYS1.VTAMLST(OCAOSA) to NCAOSA
Adjust for next swap
OpenLink must switch MAC address! Make note of which is in-use.


PRINT